Thanks to Owner-Manuals.com! This manual was exactly what I needed. As Amana was purchased by Maytag and later by Whirlpool, there was no way to receive it from their websites. I was lucky to find this resource.
Great to be able to set channels again, on an old but stoll fine working TV
Text excerpt from page 99 (click to view)
ENGLISH
Maintenance
After finishing a recording
� At the end of a recording you must remove the power source. � When recording with a Lithium Ion Battery Pack, leaving the pack on the camcorder can reduce the life span of the battery. Hence, it should be removed from the camcorder. � �
1. 1. Slide the TAPE OPEN/EJECT switch in the direction of the arrow. s Opening the cassette door ejects the tape automatically. s Please wait while the tape is completely ejected.
TAPE OPEN/EJECT
s s
/
1
2
2.
3
s
2. After removing the tape, close the door and store the camcorder in a dust free environment. s Dust and other foreign materials can cause square-shaped noise or jerky images. 3. Set the power switch to the OFF mode. 4. Disconnect the power source or remove the Lithium Ion Battery Pack. s Hold down the BATTERY RELEASE button and slide the battery pack in the direction of the arrow.