Up to now you are the BEST! Prompt-efficient and so reasonable ! I have been after SONY service manual for quite some time !Thank you very much ! I can recomend your service to
all my collegagues ! V.Bergfield .
This is a very good quality print (scan) of the original SONY service manual. The original from Sony is on very thin paper. Nevertheless it is very clear and sharp and excellent readable. I'm very satisfied to have now this rare document. I've looking for it many years (infrequent). It contains very detailed circuit diagrams, exploded views, part lists, PCB view with good readable connection lines. Very recommended.
A complete manual with all the needed details of calibrations and service instructions about the radio receiver.
A big deal.
Many thanks !
Text excerpt from page 74 (click to view)
Alignment and Adjustments
2-2 Camera Adjustment
Note : "XX XX" indicate the previous preset value and adjusted value. Press the �ENTER� (Confirm) to store the adjusted value.
CAMERA OCD
EPR EVR XX XX Adjusted values Stored values
Fig. 2-3
1) EEPROM Data Initialize
Caution : This adjustment must do following items changing new EEPROM (IC705) or Main PCB. � Press the �EASY�(Mode Up)/�DISPLAY�(Mode Down) buttons so that OSD shows �ODF XX XX�. ´ Using �MENU Dial�(Data Up/Down) so that display data of EVR is �A0� � Press the �ENTER� (Confirm). ¨ The OSD shows �OK� after huithing the initalize.
2) Lens Zoom Track
Caution : For whole zoom range, it shall be in focus. The location of a focus lens is moving depending on the location of Zoom Lens. During adjusting, micom measures the focus location from a near distance to a long. � Camera is set to E-E mode. ´ Focus chart photo. � Ensure that camera is left an about 3m distance from a focus chart and the focus of lens is placed vertically. Attach a focus chart to white or gray wall of a flat surface. ¨ Connect a video output terminal to a TV. � Press the �EASY�(Mode Up)/�DISPLAY�(Mode Down) buttons so that OSD shows "ODE XX XX". � Press the �ENTER� (Confirm). Never impact on the lens when adjusting zoom and focus Lens. The OSD shows �OK� after finishing the adjustment. 3M ± 1cm (Be sure to maintain the distance)