|
Who's Online
There currently are 5835 guests and 2 members online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
complete part-lists and pcb layout, schematic diagram is good enlargable,
;
Excellent, fast delivery, excellent product. Good luck!
;
This manual is for the usa model only. But it is clear
, accurate and comprehensive, including board layouts and schematics.
I found it extremely useful for my mitsubishi dp-86da, but the same diagram would also work for the realistic lab5000 and hi fi 80. Thanks.
;
Great to have extra resources for Service Manuals, Now days you can really not trouble shoot efficiently without one , Wayne at IRIONS TV & ELECTRONICS REPAIR Clearwater , Fl. 33755 727-446-7955
;
For five bucks you can barely buy a hamburger. Or for the same five bucks you can buy a service manual. Much more useful. (and better for your health, depending on where you buy your hamburgers).
Yes, there are free manual sites out there, but if they don't have what you want, you have to pay.
And five bucks isn't much. Not for full specs, schematics and adjustment and parts replacement procedures.
My only criticism is that grayscale illustrations aren't well rendered, but I've seen worse.
Schematics and text are clear.
I'll be happy to purchase from here again.
Mike
[email protected]
Alignment and adjustment
5. AUTO IRIS 1) Camera �E-E�, 3100¡K gray-scale chart. 2) Video(output) jack and AF MICOM. 3) Connect video(output) jack to waveform monitor input jack and monitor TV jack respectively. 4) Press the �BLC (MODE UP)/FADE (MODE DOWN)� button so that the OSD state is �CE IRISA XX XX�. 5) Press �START/STOP(confirm)� Bttom.100IRE. 6) Then, the micro process of will work; - IRIS open, IRIS control minimum Value found. - IRIS close, IRIS control minimum Value found. - Store the data to mode 84 and mode 85. 7) The OSD shows �O.K�.
6. Auto white balance 1) Camera �E-E�, 3100¡K/5100¡K gray-scale chart. 2) Video(output) jack and AF MICOM. 4) Connect vectorscope input jack to video(output) jack. 3) Press the �BLC (MODE UP)/FADE (MODE DOWN)� button so that the OSD state is �CF WBA XX XX�. a. W/B Indoor a-1. Aim the camera at a 3100¡K gray-scale chart illuminated at 1500 to 2000 lx. (40us) a-2. Press �START/STOP (CONFIRM)� button so that the white vector moves to the center on screen of the vectorscope. a-3. The OSD shows �OK!�. b. W/B Outdoor b-1. Aim the camera at a 5100¡K gray-scale chart illuminated at 1500 to 2000 lx. (40us) b-2. Press �START/STOP (CONFIRM)� button so that the white vector moves to the center on screen of the vectorscope. b-3. The OSD shows �OK!�.
Match the white luminance point with the black luminance point
Center of white level
H
100IRE
Optical black level
40US
7. Pre white balance (I) 1) Camera �E-E�, 3100¡K gray-scale chart. 2) Video(output) jack and AF MICOM. 3) Connect vectorscope input jack to video(output) jack. 4) Press the �BLC (MODE UP)/FADE (MODE DOWN)� button so that the OSD state is �1C CWBR XX XX�. 5) Aim the camera at a 3100¡K gray-scale chart illuminated at 1500 to 2000 lx. 6) Adjust the � + (DATA UP)/ - (DATA DOWN)� button so that the white vector moves to the B-Y axial on screen of the vectorscope. 7) The OSD shows �OK!�. Samsung Electronics
Match the white luminance point with the black luminance point
5-15
|
|
|
> |
|