The Service Manual was just as expected, complete with schematics and I was able to download it in less than an hour after I ordered it. The only problem with these is that the schematics are hard to read due to the small font. I could remedy this by printing them on a larger printer.
Very fast, clear and usefull site !
Also this Service Manual are very well maked and with a very good definition !
Very fast download speed !
Recomended Seller !
Payments were processed quickly and items were exactly as described. I will use owner-manuals.com in the future for any other manual needs.
Text excerpt from page 17 (click to view)
5 Disassembly and Reassembly
Figure 5-8 4. Rotate the stand base smoothly so that 2 screw holes match with the stand base and remove the 2 screws. 5. Remove the Back Cover of the Stand Front assembly.
Figure 5-10 9. Remove the 4 screws on the SMPS PCB and remove it. 10. Remove the 2 screws on the Audio Function PCB and remove it.
Figure 5-11 Figure 5-9 6. Disconnect CN804, CN806, CN814, CN815, CN816 and CN805. 7. Remove the one screw of signal cable on the stand base. 8. Lift off the back side of the stand front assembly and pull it toward the stand base. 11. Pull the tabs of Cover Hinge outward and lift off the Cover Hinge from the Stand Front assembly. 12. Remove the 4 screws on the Hinge assembly and remove it and signal cable. 13. Remove the 2 screws on the Audio PCB of stand base and remove it.