There are currently no product reviews.
Very Good! All the diagram are easy to read, and its complete.
This was an excellent source of detailed assembly information on a device which is at least 12 years old. A very lucky find, coupled with great service.
Excellent Service Manual and best price on the Internet. This Service Manual covers everything you could ever need including full circuit schematics, component layout diagrams, stripdown procedure and full parts list/breakdown. I needed this to carry out a modification to one of these headunits and this manual covered everything I needed. Fast delivery, processed within a few hours.
Thought I would never find a copy of the Technics SX-EN2 Service Manual until I found Owner-Manuals.com. Price was very fair and I received the download promptly. While a photocopy, it is quite readable and includes all the pertinent information and diagrams. Thank you Owner-Manuals!
I really like this manual and it's reliable.I found and bought easly.thank you.
REMARK DDP3310 R,1AEhex BIT(7:5) -USER PEAKING CONRTOL REDUCTION (The bigger the value is the larger the amount of REDUCTION) VPC3230 FP BLOCK R,52hex (BIT(7:0)), R,53hex(BIT(5:0))
Reproduce the levels under BLACK LEVEL (When the level=1,the levels under BLACK LEVEL are reproduced)
02 03 04
R DRIVE B DRIVE G DRIVE
0-255(X2) 0-255(X2) 0-255(X2)
200 200 200
WHITE DRIVE CONTROL - After all the SCREEN adjustments are complete, fix the value of G DRIVE and adjust HIGH LIGHT WHITE BALANCE. DDP3310 R,1B1hex Bit <5:0> (Use 12 steps out of 63 steps
to add the value of sub cont to the contrast control of picture control) DDP3310 R,168hex (Internal brightness for measurement) - Fixed Value by CRT
06 07 08 09
Lbrm R Cutoff B Cutoff G Cutoff
0-255 0-255 0-255 0-255
180 80 80 80
CUTOFF DRIVE CONRTOL - After all the SCREEN adjustments are complete, fix the value of G DRIVE and adjust LOW LIGHT WHITE BALANCE. DDP3310 R,167hex Bit<15:6>(Add the value of Sub
Brightness to Brightness Control of Picture Control) DDP3310 R,1B2hex Bit<15:9>(Use 12 steps out of 63 steps to add the value of sub color to the color control of picture control)
12 13 14 15 16 17 18 19 20
Sub Tint V Peaking Svm Gain Svm Delay Svm Limit Ttx Cont Ttx brt Pip Cont Bcl Thrs
0-12 0-12 0-63 0-15 0-255 0-255 -128-127 0-15 0-255(X8)
4 7 32 5 85 120 15 0 41
VPC3230 FP Sub R,DChex - NTSC only VPC3230 FP Sub R,28hex Bit<11:8>(Vertical peaking control) DDP3310 R,1A7hex Bit<5:0>(VM gain control) DDP3310 R,19Bhex Bit<3:0>(VM gain control) DDP3310 R,19FBhex Bit<7:0>(VM limit value control) Set TTX mode conrtast level DDP3310 EXT BRIGHTNESS SDA9489X R,11hex Bit<7:4>(PIP contrast adjustment) DD3310 R,160hex Bit <15:4>(ABL thresh hold setting) - Set ABL Operation Point (Cuve Point)