SAMSUNG D68A CHASSIS
Service Manual

Alignment and Adjustments

2. Alignment and Adjustments
2-1 Service Mode
2-1-1 SERVICE MODE Entry Method (General Transmitter)
s Using the Customer Remote 1. Turn the power off and set to stand-by mode. 2. Press the remote bottons in this order; INFO-MENU-MUTE-POWER ON to turn the set on. 3. The set turns on and enters service mode.

2-1-2 Initial SERVICE MODE DISPLAY State
2-1-2(A) OSD DISPLAY

Factory Mode 01. Picture Improvement 02. Initial Setting 03. PIP/Test Pattern 04. Option-1 05. Option-2 06. Reset Release : 2004-04-06-17:00 Version : T_NPL50PEU-0010

Current Input Mode � � � � � �

 Indicates selected input mode  Picture Adjustment  Setting the Initial Values  Setting the Special Features  Options-1 : Particular Product Options  Options-2 : PDP Properties Options  Initializing after saving the adjustments  Software Version Information

2-1-2(B) Button Operations in SERVICE MODE

Menu UP/DOWN LEFT/RIGHT (ENTER) SOURCE button

Displays all menus Cursor moves to select items To increase and decrease the data of the selected items Confirm your choice(Store OR Enter) Change input source

� While in Tuner mode, the direct access buttons can be used to select and change channels.

Samsung Electronics

2-1