First of all I must say that I received the manual in just a few minutes after placing the order. The copy is well done and very readable. I will buy others soon... Thanks, Meyer
The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.
Excellent manual, very clear, technical specification provided, useful information regarding adjustment and set up.
Text excerpt from page 16 (click to view)
Disassembly and Reassembly
4-3-3 PCB Removal
1. Refer to the Fig. 4-4. 2. Remove the wire (1P) from the chassis mounting. 3. Pull the PCB guides backwards. 4. Lift both edges of the PCB and pull out.
Disassembly
1. Ensure that the PCB is well positioned in the PCB guides. 2. The power cord must not touch the heat-sink, D73. 3. The PCB guide is part of the chassis mounting ; if a new PCB guide is needed, the complete chassis mounting must be replaced.
4-3-4 SNAPIN Removal
a
SNAPIN-CONTROL b
Fig. 4-7 Press the SNAPIN (b) with thumb ; pull the left holder-bracket (a) with index finger