This manual is accurate and of high quality. It is only volume 2 of the service manual. This is schematic, parts lists, and exploded mechanical drawings. The theory of operation and the diss-assembly instructions are in volume 1. The unit can be tricky to dis-assemble portions of so the volume 1 manual can be important. The product description of the manual is accurate but it does not say anything about volume 1 and the image of the front page does clearly say Volume 2.
Wellll again thank you very much fast and effective. Clear and well done for such an old TV!!!!
Text excerpt from page 16 (click to view)
Disassembly and Reassembly
4-3-3 PCB Removal
1. Refer to the Fig. 4-4. 2. Remove the wire (1P) from the chassis mounting. 3. Pull the PCB guides backwards. 4. Lift both edges of the PCB and pull out.
Disassembly
1. Ensure that the PCB is well positioned in the PCB guides. 2. The power cord must not touch the heat-sink, D73. 3. The PCB guide is part of the chassis mounting ; if a new PCB guide is needed, the complete chassis mounting must be replaced.
4-3-4 SNAPIN Removal
a
SNAPIN-CONTROL b
Fig. 4-7 Press the SNAPIN (b) with thumb ; pull the left holder-bracket (a) with index finger