The ease of this purchase was a good start. The content of this manual was exactly all I needed to retore my Tandberg 64.
All of the mechanical and electrical information is contained in the manual and the quality of the document makes reading the data easy.
The exerience with the resource has made this my prime source for technical data.
Owner-manuals.com is the best Possibility to give vantage HIGH CLASS Elektronic COMPONENTS
a new Life.Thanks alot for your perfekt Service.
Text excerpt from page 16 (click to view)
Disassembly and Reassembly
4-3-3 PCB Removal
1. Refer to the Fig. 4-4. 2. Remove the wire (1P) from the chassis mounting. 3. Pull the PCB guides backwards. 4. Lift both edges of the PCB and pull out.
Disassembly
1. Ensure that the PCB is well positioned in the PCB guides. 2. The power cord must not touch the heat-sink, D73. 3. The PCB guide is part of the chassis mounting ; if a new PCB guide is needed, the complete chassis mounting must be replaced.
4-3-4 SNAPIN Removal
a
SNAPIN-CONTROL b
Fig. 4-7 Press the SNAPIN (b) with thumb ; pull the left holder-bracket (a) with index finger